Fast, Reliable Gate Parts & Welding Across Burlingame
Gate parts and welding repair in Burlingame typically runs $180–$650 depending on whether you’re fixing a single corroded hinge or replacing a structural post with custom welding. Most hinge and latch replacements on ornamental iron gates are completed in one visit, while post replacement or rail welding on larger driveway gates may require a second trip for concrete curing. Call (628) 261-6223 for a free estimate — we’ll diagnose it on-site and weld what we can the same day.
We’ve been crossing the Peninsula to work in Burlingame since the early 1990s, and our Gate Parts & Welding team knows the difference between a quick Hillsborough estate call and a careful restoration on a 1930s Craftsman gate near Burlingame Avenue. The marine fog here is relentless. It eats steel differently than it does in San Mateo or San Carlos. That matters when you’re choosing hinges, planning welds, or recommending whether a corroded operator bracket can be saved.
Burlingame sits directly on the western shore of San Francisco Bay, meaning residential gates absorb persistent salt-laden marine fog far more aggressively than even nearby inland Peninsula cities like San Mateo or San Carlos. This, layered on top of a dense stock of 1920s–1950s Craftsman and Spanish Colonial Revival homes with ornamental wrought-iron gates, means the dominant repair pattern here is deeply corroded hinges, seized latches, and degraded welds on period ironwork — not just basic adjustment or automation failure. We’ve replaced hinges on Oak Grove Avenue that were less than five years old but looked like they’d spent a decade underwater. That’s the reality of working in Burlingame, and it’s why we stock marine-grade stainless hardware and carry portable welding rigs built for field repairs on historic ironwork.
Why Liberty Gate Repair San Francisco Is Burlingame’s Preferred Gate Parts & Welding Company
Our Burlingame customers aren’t looking for the cheapest bid. They’re looking for someone who won’t damage a period gate or recommend a replacement when a proper weld would last another thirty years. 613 customers rated us 4.9 stars — not because we’re the fastest, but because Steven diagnoses it, Steven fixes it, and we don’t leave until the gate moves like it should.
Steven Lee has spent over 31 years working on gates exclusively. Not fences, not garage doors, not general construction — gates. That matters when you’re troubleshooting a 1990s Viking operator on a Burlingame Hills estate and need to know whether the control board failure is from corrosion, capacitor fatigue, or both. We’ve earned our reputation in Burlingame one hinge replacement at a time, from the flatlands near Broadway to the winding streets above Alvarado.
Our response time to Burlingame is typically same-day or next-day, depending on whether we’re already on the Peninsula. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule — which means most Burlingame repairs don’t wait for a second trip. When we replaced a seized Viking operator on a 1990s-era estate gate in Burlingame Hills, the original unit’s control board was corroded beyond repair from decades of fog exposure, so we installed a new LiftMaster opener with smart-home integration, matching the custom wrought-iron gate’s weight with proper roller and hinge replacements. One visit. No subcontracted welding. No “we’ll come back next week with the parts.”
Our Gate Parts & Welding Services in Burlingame
Hinge Replacement
Corroded hinges are the most common call we get from Burlingame’s flatland neighborhoods near the Caltrain corridor and along the older streets off Burlingame Avenue. The salt-laden fog penetrates standard steel hinge pins and barrels, causing seizure or catastrophic failure — often on gates that look fine from the outside. A typical hinge replacement in Burlingame runs $180–$340 for standard ornamental iron, or $380–$520 for heavy-duty estate gates with custom-welded mounting plates. We stock marine-grade 316 stainless hinges for coastal Burlingame properties, and we weld new mounting brackets on-site when the original jamb or post steel has corroded too thin to accept standard fasteners.
Post Replacement
Gate posts in Burlingame fail two ways: the buried portion rusts through from soil moisture accelerated by the high water table near the bay, or the above-ground section corrodes at the hinge interface from fog exposure. Post replacement is structural work — we excavate, set a new steel or pressure-treated post in concrete, and often rehang the existing gate with new hinges welded to fresh steel. In Burlingame, this typically costs $650–$1,200 depending on gate weight, concrete depth requirements, and whether we need to match existing wrought-iron detailing. We’ve replaced posts on Lerida Court and in the Hills where the original 1950s iron post had simply dissolved at the concrete line.
Rail Repair & Custom Welding
Burlingame’s ornamental gates — the scrollwork and picket rails on Spanish Colonial Revival and Tudor Revival homes — were built to last, but the welds weren’t always. We’ve repaired cracked rail joints on gates from the 1920s and 1930s near El Camino Real, matching the original wrought-iron fabrication with TIG welding and period-appropriate filler rod. Custom welding in Burlingame runs $280–$580 for rail repair and reinforcement, or $450–$850 for more extensive ornamental reconstruction. We don’t farm this out. Steven welds on-site, which means we can test the gate’s swing and alignment before we pack up.
Gate Rollers, Latch & Lock Hardware
Sliding gate rollers seize. Latches corrode shut. Lock mechanisms fill with grit and salt residue. In Burlingame, we see this most on estate gates in the Hills and on vintage driveway gates along the flatlands where the marine layer sits longest. Roller replacement runs $220–$380; latch and lock replacement or rekeying runs $160–$290. We carry V-track and cantilever rollers for common gate weights, and we can fabricate custom latch keepers when the original post has settled or the gate frame has twisted from wood swelling.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlingame
We’re factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That familiarity matters in Burlingame because the housing stock tells a story. The 1990s–2000s estate builds in Burlingame Hills and along the Hillsborough border often shipped with Viking or Linear operators — solid units in their day, but now hitting end-of-life with control boards and drive gears that no amount of firmware updating will save. We stock replacement operators and have the programming tools to match your existing remotes and access codes. For newer Burlingame homes and retrofits, we install and service LiftMaster and Ghost Controls systems with smart-home integration. We don’t guess at compatibility. We’ve worked on all of them, in Burlingame, for decades.
Common Gate Parts & Welding Problems We See in Burlingame Homes
- Corroded hinges and seized latches on ornamental wrought-iron gates. The salt-laden fog rolling off San Francisco Bay deposits chloride on steel hardware, accelerating oxidation rates measurably faster than in inland Peninsula cities. We’ve replaced hinges on Burlingame gates that were installed just three years prior but showed decade-equivalent corrosion.
- Wood gate panels warping and swelling seasonally. Burlingame’s persistent moisture causes cedar and redwood driveway gates to expand and contract, throwing automated operators out of alignment and stressing hinge mounts. We see this repeatedly on properties near the bay where the marine layer lingers until midday.
- End-of-life Viking and Linear operators from the dot-com boom era. Gate technicians working Burlingame Hills and the streets bordering Hillsborough regularly encounter 1990s–2000s-era Viking and Linear automated gate operators that original owners installed during the dot-com boom buildout — many now corroded beyond firmware fixes and needing full operator replacement, a concentrated end-of-life wave not seen at the same density in neighboring cities.
- Degraded welds on period ironwork. The original wrought-iron gates on Burlingame’s 1920s–1950s homes were often gas-welded or brazed with techniques that don’t hold up to decades of vibration and thermal cycling. We find cracked rail joints, separated scrollwork, and failed gate-frame corners that need TIG repair with matching filler metal.
Pricing for Gate Parts & Welding in Burlingame, CA
Here’s what we typically charge for gate parts and welding work in Burlingame. These are real ranges based on jobs we’ve completed in ZIP codes 94010 and 94011 — not generic estimates pulled from a national database.
| Service | Typical Range in Burlingame |
|---|---|
| Hinge replacement (standard ornamental iron) | $180–$340 |
| Hinge replacement (heavy-duty / estate gate) | $380–$520 |
| Post replacement with concrete | $650–$1,200 |
| Rail repair & custom welding | $280–$580 |
| Ornamental iron reconstruction welding | $450–$850 |
| Roller replacement (sliding gate) | $220–$380 |
| Latch & lock replacement or rekeying | $160–$290 |
| Operator diagnostic & minor repair | $150–$280 |
| Full operator replacement (Viking/Linear/LiftMaster) | $1,200–$2,400 |
What moves the needle? Gate weight, access to the work area, whether we need to match period ironwork, and how far the corrosion has spread. A hinge replacement stays cheap when we catch it early. Wait until the hinge seizes and tears the mounting bracket, and you’re looking at welding new steel to the post. We always inspect first — estimates are free, and we’ll show you exactly what we found. Call (628) 261-6223 to schedule.
We Also Serve Cities Near Burlingame
Our shop is in San Francisco, but we work the full Peninsula corridor. If you’re in Hillsborough, Millbrae, San Mateo, or San Bruno and need gate parts or welding, we cover those areas on the same routes that bring us to Burlingame. The same marine fog issues apply — particularly in Millbrae and San Bruno near the bay — and we bring the same parts inventory and on-site welding capability.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Burlingame
Your hinges rust fast because Burlingame’s daily marine fog deposits salt moisture on metal hardware, causing corrosion rates on steel hinges, springs, and operator brackets that are measurably faster than in inland Peninsula cities like San Mateo or San Carlos. Standard oiling helps, but it doesn’t seal out chloride-laden condensation. We recommend upgrading to 316 stainless steel hinges for coastal Burlingame properties, and we weld custom mounting plates when the original steel has thinned too far. Call (628) 261-6223 for an inspection — we’ll show you exactly what’s failing and whether stainless or a protective coating makes sense for your gate.
Replace it. The concentrated wave of 1990s–2000s Viking and Linear operators in Burlingame Hills and along the Hillsborough border has reached end-of-life, and control board corrosion from decades of fog exposure usually makes repair uneconomical — parts are scarce and firmware can’t fix hardware degradation. We install modern LiftMaster or equivalent operators with smart-home integration, matched to your gate weight with proper hinge and roller upgrades. Full replacement typically runs $1,200–$2,400. Call (628) 261-6223 and we’ll assess whether your existing gate structure can handle a modern operator or needs reinforcement first.
Yes — we fabricate and weld custom wrought-iron components on-site to match period details. We don’t order generic replacements and hope they fit. For Burlingame’s 1920s–1950s homes, we’ve hand-formed scrollwork, forged picket replacements, and welded new frame corners that blend with existing ironwork. Steven does this personally, not outsourced to a third-party metal shop. Custom welding and fabrication runs $280–$850 depending on complexity. Call (628) 261-6223 to schedule a measurement — bring photos if you have them.
We prevent warping by specifying properly seasoned cedar or redwood, sealing all six sides with marine-grade finish, and designing gate frames with cross-bracing and expansion gaps that accommodate seasonal movement. For automated gates, we install adjustable hinge mounts and operator arms with enough travel to handle the ¼-inch to ½-inch seasonal shift we see in Burlingame’s moisture-heavy environment. If your gate is already warping, we can plane, reseal, and rehang it — or replace the panel if the core has degraded. Call (628) 261-6223 for an assessment; estimates are free.
Yes, it’s common in Burlingame specifically because wood gate panels absorb moisture from the marine layer and seasonal rains, expanding and throwing automated operators out of alignment — a pattern we see far more here than in drier inland Peninsula cities. The fix isn’t just adjusting the operator; it’s checking whether the gate frame has twisted, the hinges have settled, or the post has shifted in saturated soil. We diagnose the root cause, realign the system, and recommend hardware or drainage improvements to reduce recurrence. Call (628) 261-6223 — we’ll get it tracking straight again.
Ready to fix your gate? Call Liberty Gate Repair San Francisco at (628) 261-6223 for a free estimate. We stock parts, weld on-site, and we’ve been doing this for over 31 years — in Burlingame, for Burlingame.
Reviewed by Steven Lee, Owner and Lead Technician at Liberty Gate Repair San Francisco, serving Burlingame since the early 1990s.