Ghost Controls Gate Repair in San Lorenzo, CA | Liberty Gate Repair San Francisco
Ghost Controls gate repair in San Lorenzo typically runs $180–$450 depending on whether you’re looking at a control board reset, actuator replacement, or full system troubleshooting. We’re Liberty Gate Repair San Francisco, an independent service provider — not manufacturer-authorized — and we’ve been working on Ghost Controls systems across the East Bay for over 31 years. If your swing gate opener stopped responding after last night’s fog rolled in, or your remote’s blinking red and the gate won’t budge on a narrow San Lorenzo Village side yard, we carry OEM-compatible parts and weld on-site. Call (628) 261-6223 for a free estimate.
Why San Lorenzo Residents Choose Us for Ghost Controls Service
Steven Lee has been the one answering the phone and turning the wrench for 31 years. That matters in San Lorenzo, where a gate repair often means squeezing into a 36-inch gap between a 1952 ranch wall and a neighbor’s fence to reach a seized actuator. We’ve seen out-of-area contractors show up with a standard toolkit and realize too late they can’t even get their body into the workspace.
We’re factory-familiar with Ghost Controls — the TSS1, TDS2, and premium APT series — and we stock solenoids, control boards, and replacement arms so we’re not ordering parts after we’ve already driven to your property. Our 613 verified reviews average 4.9 stars because Steven diagnoses it, Steven fixes it, and we don’t leave until the gate cycles cleanly in both directions. That Saltair Street humidity that rusts your hinges in six months? We factor it into every repair. We weld new post brackets on-site instead of scheduling a second visit. For San Lorenzo homeowners dealing with aging Bohannon-era hardware, that efficiency matters.
Common Ghost Controls Gate Repair Problems We Solve in San Lorenzo
- Control board failure after marine layer exposure. San Lorenzo’s persistent Bay humidity keeps Ghost Controls circuit boards in near-constant moisture contact. We replace OEM-compatible boards and relocate vulnerable junction boxes where possible — especially critical on low-lying properties near San Lorenzo Creek where ambient moisture is highest.
- Actuator arm seizure from rusted mounting hardware. The original 1940s–50s concrete slabs throughout San Lorenzo Village heave and crack, stressing gate post anchors. When your Ghost Controls TDS2 actuator is fighting a twisted post, the motor burns out fast. We cut out rotted posts and weld new steel anchors in the same visit.
- Remote sync loss in tight side-yard installations. On those 36–42 inch Bohannon lot clearances, antenna placement is compromised from day one. We reposition Ghost Controls receivers for reliable signal capture without gate swing interference — a fix generic technicians miss because they don’t know San Lorenzo’s standardized lot widths.
- Battery drain from frequent cycling on failing hinges. When salt-air corrosion seizes hinges on a steel gate, the Ghost Controls opener works harder, draining the 12V battery prematurely. We replace hinges and adjust limit switches together so the motor isn’t compensating for mechanical drag.
- Limit switch misalignment on heaved concrete. San Lorenzo’s old slabs shift seasonally. A Ghost Controls gate that once closed flush now bangs or reverses — usually a limit switch thrown off by 1/4 inch of concrete movement. We recalibrate and reinforce mounting plates to absorb future heave.
Ghost Controls Service in San Lorenzo: What Local Conditions Mean for Your Equipment
Here’s the San Lorenzo reality that shapes every Ghost Controls repair we do: this entire community is essentially a single planned development, built by David Bohannon between 1944 and 1955, with thousands of nearly identical ranch homes on standardized lots. That uniformity creates a wave of simultaneous hardware failure you don’t see in mixed-age neighborhoods. When we’re servicing Ghost Controls systems on San Lorenzo Village properties, we’re often working on gates installed 15–20 years ago as first-generation replacements for original 1950s hardware — and those replacements are aging out across hundreds of homes at once.
The narrow side-yard clearances Bohannon specified — typically 36–42 inches — mean Ghost Controls actuators operate in confined arcs with minimal ventilation. Marine layer humidity from the Bay gets trapped in these channels, accelerating corrosion on steel components that a more open installation might tolerate. We’ve replaced TDS2 units on Hesperian Boulevard properties where the previous installer never accounted for this microclimate. A gate that gives you trouble every winter isn’t a gate you can trust — let’s fix it right the first time.
Ghost Controls Models & Products We Service in San Lorenzo
We work on the full Ghost Controls residential line: the TSS1 single swing, TDS2 dual swing, and APT premium series with solar compatibility. For San Lorenzo’s smaller Bohannon lots, the TSS1 is most common — compact, battery-driven, and often paired with a 10-watt solar panel kit that struggles in our overcast East Bay summers. We stock replacement 12V batteries, control boards for all three series, and actuator arm assemblies.
Our approach is OEM-compatible, not OEM-only. Ghost Controls proprietary parts work well; when they’re backordered or discontinued, we source equivalent-grade components from our same-day inventory. We don’t upsell a full system replacement when a $45 limit switch and a welded post bracket solves the problem. For San Lorenzo’s aging housing stock, that honesty saves homeowners from unnecessary upgrades.
Ghost Controls Service Pricing in San Lorenzo
| Service | Typical Range |
|---|---|
| Diagnostic & tune-up | $180 – $250 |
| Control board replacement | $220 – $340 |
| Actuator arm repair/replacement | $280 – $450 |
| Post anchor welding & reset | $200 – $380 |
| Full system troubleshooting (complex) | $350 – $500 |
What drives cost: accessibility on those tight San Lorenzo Village side yards, whether concrete heave has damaged mounting hardware, and if marine layer corrosion has spread beyond the initial failure point. Our free estimate includes full mechanical and electrical diagnostics — no charge to look, no pressure to proceed. Call (628) 261-6223 and we’ll give you an exact quote after seeing your setup.
Serving San Lorenzo, CA — Our Local Coverage Area
We’re based in the San Lorenzo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in San Lorenzo
No. Liberty Gate Repair San Francisco is an independent service provider with no manufacturer affiliation. We’re factory-familiar with Ghost Controls systems through 31 years of hands-on repair work, not through a dealer program. This means we can source OEM-compatible and aftermarket parts flexibly, often faster than authorized channels with backorder delays.
We use both, depending on availability and what’s right for your specific failure. For San Lorenzo’s salt-air environment, we sometimes spec upgraded stainless hardware over standard Ghost Controls fasteners. We explain the trade-off before ordering — no surprises on what goes into your gate. Call (628) 261-6223 to discuss part options for your model.
Most single-component repairs — control board, battery, limit switch — run 1.5 to 2.5 hours. Jobs requiring post welding on those confined Bohannon-era side yards add time for precise angle work. We complete 80% of San Lorenzo calls in one visit because we stock parts and weld on-site. Call (628) 261-6223 to check current availability.
We service the TSS1, TDS2, and APT series residential swing gate openers, including solar-compatible configurations and the AXWK premium wireless keypad. We don’t work on Ghost Controls slide gate systems — that line was discontinued and parts are no longer supportable.
A full dual-actuator replacement with post reconstruction on a heaved Hesperian Boulevard slab ran about $890. More commonly, San Lorenzo homeowners see $220–$340 for control board or actuator work. The free estimate tells you exactly where you land before we start — call (628) 261-6223 to schedule yours.
Service Areas Near San Lorenzo
We run Ghost Controls service calls throughout the East Bay from our San Francisco base, including San Lorenzo and neighboring communities: Stockton to the east for rural property swing gates, Interlaken and August for Central Valley agricultural installations, Manteca for residential tract developments with similar post-WWII housing stock, Davis for university-area property managers, and Garden Acres for compact-lot repairs. Travel time varies; San Lorenzo remains our most frequent East Bay call due to the concentrated Bohannon-era housing.
Book Your Ghost Controls Service in San Lorenzo Today
Your Ghost Controls gate doesn’t need a sales pitch — it needs someone who knows why San Lorenzo’s humidity kills circuit boards and how to weld a post bracket in a 38-inch gap. We’ve been doing exactly that for 31 years. Call (628) 261-6223 for a free estimate. Same-day appointments are often available for urgent failures.
Reviewed by Steven Lee, Owner at Liberty Gate Repair San Francisco, serving San Lorenzo and the East Bay since 1993.